The oZone is the Original Obutto Gaming Cockpit. Featuring a smaller foot print then the R3Volution, it allows for gaming comfort in tight spaces. The addition of an available Triple Monitor Mount (sold separate) and Acrylic Tabletop Accessory (sold separate) expand your oZone to a full-fledged gaming rig. Also suitable for flight sims, the Obutto Flight Stick Mount & A10 Hotas Mount work for both cockpits, allowing you to fly center stick or side stick.
Separate monitor stand for ultimate adjustability, accommodates any size monitor from 19" to 55" (Large displays work only in a single display orientation. Triple screens up to 3x 32") Main monitor mount is fully articulating with approx. 25cm of travel.
Foot or pedal tray with angle & over 20cm of distance adjust-ability, pre-drilled for major racing and flight controllers (Logitech, Thrustmaster, Fanatec)
Tall shifter mount to accommodate major H-pattern shifters (Logitech, Thrustmaster, Etc - FANATEC Shifters require hard mounting.) Also doubles as a throttle mount for flight sims.
Steering wheel mount is pre-drilled for major racing and flight controllers (Logitech (G25/27 & Flight controllers), Thrustmaster T500 RS, Saitek, Fanatec 911 & CSR wheels)
Steering wheel mount is pre-drilled with 75x75 & 100x100 VESA bolt patterns so displays can be mounted instead of controllers (For flight sim users)
Steering wheel mount is height, distance and tilt adjustable
Includes a 1.5mm thick self-adhesive neoprene for steering wheel mount & pedal tray (this softens the interface between the controllers and the steel mount, making it more comfortable, and allowing your devices to remain in pristine condition)
Hidden wire management inside the spine of the cockpit.
6 Month Warranty from Obutto
The R3Volution is the next generation Obutto Gaming Cockpit. Featuring much more adjustability over the oZone, it provides gamers with an insane amount of adjustability & comfort. Also suitable for workstations, replacing your desk entirely with the optional Acrylic Tabletop Accessory (sold separate) that features fully articulating arms that swivel and tilt. Available Triple Monitor Mount (sold separate) also features fully articulating arms, allowing ultimate adjustability of your displays up to 32" big. While a higher price tag then the oZone, the added adjustability makes this cockpit our best-seller since it's release!
RAID 0(Striping) takes two drives of the same size and creates a bridge between them to make them act as one large drive. For example two 250GB drives would show up on the system as one large 500GB drive. This increases the speed of data being processed as it writes and reads across both drives. The downside is there is no data security. If one drive goes down in the RAID 0 configuration all data is lost as half is stored on one drive and the other half on the other. This is best used for situations where the data is not critical, but a speed performance increase may be desirable such as when using the machine for gaming.
RAID 1(Mirroring) takes both drives and uses one to create a real time backup to the second. In this case two 250GB drives will show up as one 250GB drive. This is a good setup for those looking for data security as information put on the main drive of the RAID will immediately be copied over to the other drive as an exact match. You do lose some speed due to the extra processing, but allows for the data to be saved if one of the drives in the RAID go down. Simply replacing the defective drive will automatically rebuild the array over a short time.